It is pretty easy. your remove 2 screws from the front bottom of the panel grab it from the bottom and yank it outwards. The heater is then easily accessed.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Answers & Comments
It is pretty easy. your remove 2 screws from the front bottom of the panel grab it from the bottom and yank it outwards. The heater is then easily accessed.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61