Turns off and then turns back on again on loop
The Flat panel of the screen is good, when you turn on the screen it flickers on for a second (just long enough to read RGB in the corner) and then the screen immediately turns off and then turns back on again on loop.
Can i fix it or is it to throw away?
Can i fix it or is it to throw away?
Computers & Internet - ViewSonic - Optiquest - OptiQuest Monitor
Answers & Comments
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed Viewsonic monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://www.badcaps.net
http://en.wikipedia.org/wiki/Capacitor_plague