Tv2 remote not working tv1 must be on
My remote for tv2 will not operate satellite unless tv1 is on or is unplugged from the wall and the box. This happened when I got a new westinghouse tv1 a couple months back and through troubleshooting we got it to work if tv1 was hooked up with RCA cables from the box yet unplugged from wall cable wire. Box is Dish322.
Televison & Video - DISH Network - IR Remote Control
Answers & Comments
It sounds like the RCA cable is plugged into TV 2 ports on the back of the receiver.
Depending upon your receiver, towards the center on the back of the receiver, you have 3 rows of colored (2 - Red, White, and Yellow; 1 - Green, Blue, Red). The RCA for TV 1 should go in the middle row. Please let me know if you have further problems. Thanks.
Yes Ray! Removing the antenna and putting the tv2 remote up to the port does change the channels on tv2. What does this mean? I assume something with the westinghouse tv is causing this?
Try screwing the antenna back onto the antenna port and let me know if it is working now. Thanks.