Unable to boot up my O2 Xda Atom
Hi,
the O2 Atom (not exec) hang on me when it was on a call.
I did the standard routine by taking out the battery and put it back after several minutes. But this time, it failed to boot up (not even see the O2 screen) .
Based on the online search, i had done the following,
- Tried soft and hard reset, with SIM card, without SIM card.
- Took out the SD card
- Tried to recharge the battery.
- Take out the battery for a day and retry.
Tried different permutation but still failed to revive it.
Few observations,
- I had saw both the LEDs blinks when i tried the reset.
- The power LED was red, when i connect it to my PC via USB.
- My PC unable to detect my O2
- I am still able to access to the MN1 Bootloader.
Any suggestion?
Or my O2 Atom can rest in peace forever?
Thank you guys.
Rgds,
Cafei
the O2 Atom (not exec) hang on me when it was on a call.
I did the standard routine by taking out the battery and put it back after several minutes. But this time, it failed to boot up (not even see the O2 screen) .
Based on the online search, i had done the following,
- Tried soft and hard reset, with SIM card, without SIM card.
- Took out the SD card
- Tried to recharge the battery.
- Take out the battery for a day and retry.
Tried different permutation but still failed to revive it.
Few observations,
- I had saw both the LEDs blinks when i tried the reset.
- The power LED was red, when i connect it to my PC via USB.
- My PC unable to detect my O2
- I am still able to access to the MN1 Bootloader.
Any suggestion?
Or my O2 Atom can rest in peace forever?
Thank you guys.
Rgds,
Cafei
Computers & Internet - O2 - Xda - Xda Atom Exec Smartphone
Answers & Comments
Dear cafei,
Go to boot loader on your O2 XDA atom by removing batt+pressing camera button+plugging in the batt back WHILE still press holding the cam button the ue the stylus to press soft reset button, then connect to your pc via usb, then run the update program (most refer to it as DSUU, u can download one from seeo2.com) just wait for the progress to complete and you're done.
if in case you get stuck at 6%, unplug usb cable, remove battery, then insert battery while press holding the power button, while still holding the power button, press the reset button with the stylus, it should show the o2 splash, wait for any progress. then re-run the DSUU again to perform full flash.
Good luck!
disclaimer:
please take note that i did not suggest any 3-party rom, it is best if you try the O2-released ROM (or DSUU).
Your mini caught a bug take out memmory card and do a wipe on it format it then install back in smartphone hook up to comp and reinstall software
these smartphone by far are little comps and still subsetible to bugs becarefull what your downling and turn on your certifacate reader for programs this will give your smartphone a little better defense
also you smartphone should just work without the memmory card and things should come back to normal