Unable to either use the remote or the buttons on the player to operate the player. The light is red, replaced battery, and still will not function. Isn't the light supposed to change to green?
Televison & Video - Cyberhome - CH-DVD 300 DVD Player
The power board inside the DVD is burned/ damaged.You need to take it to the service center to replace the power unit.
If you know what to do, you can open the DVD case, then replace the power board.To locate it, simply follow the power cord, power cord attached to the power board. Replace with same type of boards.
Answers & Comments
Check the 5V power supply output. If less than 4V, replace filter caps on power supply board.
The power board inside the DVD is burned/ damaged.You need to take it to the service center to replace the power unit.
If you know what to do, you can open the DVD case, then replace the power board.To locate it, simply follow the power cord, power cord attached to the power board.
Replace with same type of boards.