Usr5450 robotics default ip address
I have use the AP model usr 5450, i need to access the AP so that default ip address is require, if any one help me i am thank ful to that person..
Ali
Computers & Internet - D-Link - AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point
Answers & Comments
See review at http://www.wi-fiplanet.com/reviews/article.php/3088971
which says that the unit defaults to an "automatic" address (i.e., it's a DHCP client).If that's true, then you would have to set up the AP on a network that already has a DHCP server, such as on the LAN side of a wireless router. Apparently there is also a configuration utility that doesn't depend on the IP address, and can be downloaded from USR. See the product page at http://www.usr.com/support/product-template.asp?prod=5450
I don't know what you mean about 'so that default ip address is require', however to access your router/access point, the default address should be 192.168.0.1 for your routers configuration site, which you would type into your internet browser (internet explorer).
If it is not set at 192.168.0.1 for any reason, go to start>run>cmd and then OK. In the command prompt, type in "ipconfig". It will list you some addresses, Default Gateway would be the address to your router settings, enter that one into your browser.
If this isn't what you meant, please clarify.