V:\ is not accessible Error performing inpage operation
I was de-fragmenting my external hard drive and it was at about 33% when the power went out. When I went to resume, I now get a error message that says: V:\ is not accessible Error performing inpage operation. This is my video drive and has all my video's on it as well as other important information. This drive has been working great up until the power outage during de-frag.
Computers & Internet - Fantom - Drives Titanium II (TFD160U2) 160 GB USB 2.0 Hard Drive
Answers & Comments
To expand upon what ikkenom said, this will work much better done from the command line.
(Assuming Windows XP)
Click "Start", "Run...", type "cmd" and click [OK] or press [Enter]. From the command line type "chkdsk V:\ /F". You can optionally include the "/R" option to check for bad sectors on the disk (Be patient, this will take a long time, especially if there are bad secors).
If this fails, add the "/X" option. This dismounts the volume before proceding. You may need to reboot afterwards before examining the drive.
A MS article describing this error implies that is is likely a physical disk error and the technical reason why the error mistakenly implies a paging fault: http://support.microsoft.com/default.aspx?scid=kb;en-us;141117
I know how distressing it can be to loose pictures and video you've worked so hard to acquire/produce. Good luck!
Instead of formatting, have you tried deleting the partition first? If you do and the hd either won't recreate the partition or won't format the newly created partition you're looking a damaged HD.
Were you able to get all the style="display:none;">Instead of formatting, have you tried deleting the partition first? If you do and the hd either won't recreate the partition or won't format the newly created partition you're looking a damaged HD.
Were you able to get all the data off that you needed? Hope so.
no sol problem plz another tips
Open then my computer then, rigth click the Drive, C: or D: or then drive you want to fix.. Then Go to Tools, click check now ..then check all elextion.. then ok if neeed restart make restart. don't desconnect untill done..don't intirup it.. must be complate