Ok guys here is the fix for vist and or windows 7 to make your scanners work
1. put your cd in the drive don't let it autorun

2. goto my computer then right click the driver that has your install disk in it

3. click open

4. then fine the drivers folder and open it

4. the file you see should be your driver for your scanner the number on this file should be the modle # of your scanner

5. right click that file then click run as adm. allow any and all pop up's

6. after the install is done restart your computer

7.after the computer reboots go back to my computer and open the driver that has you install disk and open it (do not do auto open) like for this file start32.exe and right click it then click run as adm. allow any and all pop up's (you may see something saying in any one of the steps that the driver or software u are trying to load dose not have a signature always click ok, allow, or indtall this sofe ware is old so it dose not have a signature)

8. after the install is done reboot your computer goto control panle and open it look for systems and open it goto device manager open it then look for your scanner it should not be hard to fine it's the one marked with the yellow flag

9. right that file then goto properties then click on it then goto update driver ( do not click driver update software in the same menu with properties) another menu will open up click on update driver it's just below the driver details box

10. now windows will update your driver when done restart your computer and y should be good to go