Volume I am a noob when it comes to turntables. I inherited an sl 1200mk2. I can not figuire out how to get the volume to play louder. I have a very nice sound system but can not get to play at high volume
I has the same problem. You must plug it in into your PHONO receiver. If you do not have a PHONO line in, you have to buy a Phono PreAmp at Guitar Center and once you set it up, you can then plug it into any input. Good Luck
Answers & Comments
As LOCAUSS stated, you have to connect to the following:
1) Turntable --> PHONO (input)
or if you do not have a PHONO input, then you have to buy a PHONO PRE-AMP, from there...
1) Turntable --> Input on Pre-Amp --> Output from Pre-amp goes to INPUT of either Line, CD, Aux, or Tape input on receiver/amp/system.
Hope this helps.
- OPTiC
The 1200s Expert
www.1200s.com
I has the same problem. You must plug it in into your PHONO receiver. If you do not have a PHONO line in, you have to buy a Phono PreAmp at Guitar Center and once you set it up, you can then plug it into any input. Good Luck
Please let me know how your turntable is connected to the music system. I mean, to which input ? (Tape/Aux/Phono/VCR/CD) ?