I have a ZSR1134WE Zonet and when I had it installed I didn't put a name and password in it and I would like to do that now. How do I do that. I can't fine my book on the router.
Using your wired computer, open your Internet Explorer and type http://192.168.1.1 that's for the router's setup page. It will prompt you for username and passwrod. By default, both username and password is guest then press ok. If that didn't work, use your own password. Once you are in, click on the Wireless tab and you can set your own signal name and wireless security there. Apply the changes after.
Answers & Comments
Using your wired computer, open your Internet Explorer and type http://192.168.1.1 that's for the router's setup page. It will prompt you for username and passwrod. By default, both username and password is guest then press ok. If that didn't work, use your own password. Once you are in, click on the Wireless tab and you can set your own signal name and wireless security there. Apply the changes after.