Hi,

Procedure for Software Update on Binatone Carrera X350 & X430 Australia
Note: Prior to this procedure please make sure you are in possessions of an SD
card.
1) Download the file X350AUS. zip or X430 AUS.zip from the Binatone website
http://www.binatone.com.au/gps.html
2) Extract the file “X350 AUS .zip“ or “X430 AUS. zip”
Then open the folder “X350 AUS” or “X430 AUS” to find
“Mobile Navigator Folder”
3) Copy the “Mobile Navigator” folder from your computer to the root of the SD
Card
4) Make sure your Binatone Carrera X350 or X430 Australia device is powered
off & Insert your SD card
{X350 & X430 Version 2}
Below step 6-10 only for X350 & X430 Version 2 Australia only
(To identify if your GPS device is version 2. The home screen will appear with the
large Circle Navigation image & smaller circle for Menu as displayed below.
Version1 users please see page 3)
5) Switch your Binatone Carrera X350 (X430) Australia device on
6) The screen below appears on your device
Click onto Navigation

7) Next,the screen below will appear on your device
Click onto Go…
8) After 5-10 Seconds , the screen below will appear on your device
9) On the screen above, tap on “OK”, then power off & remove SD card from
your GPS device, then reboot your GPS device. Tap on “Navigation” as
normal when the GPS is first turned on.
Go to “Settings”> “General settings”> “About”. The screen below will appear
“4.1..Mar,2008” is displayed as updated Software.

{X350 & X430 Version 1}
Below step 11-16 only for X350 & X430 Version 1 Australia
10) Switch on your Binatone Carrera X350 (X430) Australia device
Note Spanish language on the screen shots please ignore this & refer to
English word on the location of each image.
11) Tap on settings, The screen will appear on the device as below
12) Tap on Memory Source, The screen will appear on the device as below
Click on SD.MMC, Set the memory source from nandFlash” to SD/MMC”,
Then tap the back button to go to the main menu as below
Click on to Navigation on the main Menu

13)
The Screen appears on your device as below
Click onto Go…
14) After 5-10 Seconds , the screen below will appear on your device
15) On the screen above, tap on “OK”, then power off & remove SD card from
your GPS device, then reboot your GPS device, . Tap on “Navigation” as
normal when the GPS is first turned on. Go to “Settings”> “General settings”>
“About”, the screen below will appear
“4.1..Mar,2008” is displayed as updated Software.