Good morning. To start off with, get a shallow pan. At the bottom front of your washer, there is a filter trap. If its not visible, you will have to remove the kickplate held on by three screws at bottom. Slide shallow pan underneath and up to frame. Slowly turn counterclockwise until water starts to come out. When pan is midway full, empty. Repeat this procedure until no more water comes out and unscrew filter and pull out and clean. Reinstall snugly and install kickplate if it was removed. Have a good day.
Answers & Comments
Good morning. To start off with, get a shallow pan. At the bottom front of your washer, there is a filter trap. If its not visible, you will have to remove the kickplate held on by three screws at bottom. Slide shallow pan underneath and up to frame. Slowly turn counterclockwise until water starts to come out. When pan is midway full, empty. Repeat this procedure until no more water comes out and unscrew filter and pull out and clean. Reinstall snugly and install kickplate if it was removed. Have a good day.