Not necessarily the tranny. But not familiar with that machine. Could be clutch assembly or belt. The timer seems to be doing it\'s job (1st thing i usually check when no-spin) because you are getting the squeal. If it agitates, the clutch may need to be removed and cleaned up or replaced if it even has a clutch. Regardless you\'ve already done a lot of work there so replacing anything at this point should be relatively easy if you\'ve got the tools. YouTube is also a great resource for DIYers these days. I expect to pay $100.00 give or take for the trannys i replace. search eBay and Amazon etc. Good luck be patient and put all of the screws back (even if they don\'t seem necessary.)
Answers & Comments
Not necessarily the tranny. But not familiar with that machine. Could be clutch assembly or belt. The timer seems to be doing it\'s job (1st thing i usually check when no-spin) because you are getting the squeal. If it agitates, the clutch may need to be removed and cleaned up or replaced if it even has a clutch. Regardless you\'ve already done a lot of work there so replacing anything at this point should be relatively easy if you\'ve got the tools. YouTube is also a great resource for DIYers these days. I expect to pay $100.00 give or take for the trannys i replace. search eBay and Amazon etc. Good luck be patient and put all of the screws back (even if they don\'t seem necessary.)