The RX560 has the waste pad located in the front right of the printer (when you look at it from the front).
It's not a customer serviceable part in the sense that you can't get the old pads out and replace them... You'd either need to:
get the printer serviced at an Epson service centre costing a fair bit of money
OR
fit an external waste tank.
Instructions for fitting an external tank are provided on octoinkjet and while this is a commercial site (mine, the guide can be applied to a self build kit too if you prefer).
An adjprog for the printer is available but you may have to really look for it... The SSC utility that gets suggested all the time, is not compatible so don't even bother with that one.
Answers & Comments
The RX560 has the waste pad located in the front right of the printer (when you look at it from the front).
- get the printer serviced at an Epson service centre costing a fair bit of money
- fit an external waste tank.
Instructions for fitting an external tank are provided on octoinkjet and while this is a commercial site (mine, the guide can be applied to a self build kit too if you prefer).
It's not a customer serviceable part in the sense that you can't get the old pads out and replace them... You'd either need to:
OR
An adjprog for the printer is available but you may have to really look for it... The SSC utility that gets suggested all the time, is not compatible so don't even bother with that one.
Hope that helps.
Martin