Water not pumping out spray arms
The unit fills with water and drains but the water dose not pump out of the spray arms. just makes a humming sound
665.17283400
665.17283400
Dishwashers - Kenmore - 24 in. 17283 Built-in Dishwasher
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Clog in the arm. It should spin due to water flow.
Remove the arm. Usually a tow part arm (top and bottom). Or a central screw with cover plate.
Look for a clog and remove.
If a central arm in the middle of the machine the clog can be in the pipe supplying the water. Again take apart and look for a clog.
They are not belt or gear driven. Simple water driven parts only. If the water is flowing and not leaking under the machine you should be OK with a simple clog somewhere.