Water safety sensor preventing heat up of boiler?
I have Epoca with water tank. When the boiler switch is on no heat or pressure after 1 hour...someone pointed me to the fact that there is a safety water level sensor in the tank connected by air hose and that may be faulty. I tried to ****/blow into the tube and the LED light for water level is now on. However, when I switch on the boiler, it still does not heat up. It was working fine until I cleaned and refilled the water tank.
Coffee Makers & Espresso... - Rancilio - Epoca ST
Answers & Comments
If the red light is on then the machine is not getting water and or level is low in boiler. Try this remove the bell looking softener and run it under the faucet to see if water flows through, it could be that is blocked and not letting water through, and if so then the reset switch for element might have tripped because machine has low water.