We have a Bissell Pro-Heat 9200 2X Carpet Shampooer. When you start to shampoo the carpet it runs water for a minute and then quits and won't spray any more water
The heater is clogged. Take off body assembly. There is a silver part in there the size of a dollar bill. with seven screws. That the heater element. It is clogged known problem on there bissels. Crappy design for one. But most causes are not useing bissel fluid and city water with high calcium and floride. Also clean inlet and out let ports with asmall drill bit. takes about an hour and 14 screws.
I can not solve it, but have had the same problem with 3 of their shampooers. I am on my 3rd one. Have taken it back to be repaired and it still does not work. Thank God we bought the extended warrenty and they have replaced them. Now my newest one that I have only used 3 times is having the same problem.
Answers & Comments
The heater is clogged. Take off body assembly. There is a silver part in there the size of a dollar bill. with seven screws. That the heater element. It is clogged known problem on there bissels. Crappy design for one. But most causes are not useing bissel fluid and city water with high calcium and floride. Also clean inlet and out let ports with asmall drill bit. takes about an hour and 14 screws.
I can not solve it, but have had the same problem with 3 of their shampooers. I am on my 3rd one. Have taken it back to be repaired and it still does not work. Thank God we bought the extended warrenty and they have replaced them. Now my newest one that I have only used 3 times is having the same problem.