We have a lanier 5216 copier. It has suddenly started copying pages that come out blurred and slightly enlarged.we have replaced the ink cartridge and roller.we have also replaced the old paper with new paper
Hi, System Setting Reset The system settings in the UP mode can be reset to theirdefaults. Use the following procedure. 1. Press User Tools/Counter . 2. Hold down the '#' key and then press System Settings. 3. Press yes when the message prompts you to confirm thatyou want to reset the system settings. 4.Press exit when the message tells you that the settings have been reset.Please do rate the solution if the issue is resolved or post a comment for further assistance.
Copier Setting Reset Use the following procedure to reset the copy settings in the UP mode to their defaults. 1. Press User Tools/Counter . 2. Hold down '#' key and then press Copier/Document Server Settings. 3. Press “Yes” when the message prompts you to confirm that you want to reset the Copier Document Server settings. 4. Press exit when the message tells you that the settings have been reset.Copier Setting Reset Use the following procedure to reset the copy settings in the UP mode to their defaults. 1. Press User Tools/Counter . 2. Hold down '#' key and then press Copier/Document Server Settings. 3. Press “Yes” when the message prompts you to confirm that you want to reset the Copier Document Server settings. 4. Press exit when the message tells you that the settings have been reset.
Answers & Comments
Hi,
System Setting Reset The system settings in the UP mode can be reset to theirdefaults. Use the following procedure.
1. Press User Tools/Counter . 2. Hold down the '#' key and then press System Settings. 3. Press yes when the message prompts you to confirm thatyou want to reset the system settings. 4.Press exit when the message tells you that the settings have been reset.Please do rate the solution if the issue is resolved or post a comment for further assistance.
Thank you for using fixya have a nice day:-)
Copier Setting Reset
Use the following procedure to reset the copy settings in the UP mode to their defaults.
1. Press User Tools/Counter .
2. Hold down '#' key and then press Copier/Document Server Settings.
3. Press “Yes” when the message prompts you to confirm that you want to reset the Copier Document
Server settings.
4. Press exit when the message tells you that the settings have been reset.