Hi Thanks for using FixYa. You’ll need to check for the following-- 1. Fuse (blown or tripped). 2. 120 VAC supply wiring connection faulty. Repair or replace wire fasteners at dishwasher junction box. 3. Electronic control board faulty. 4. Motor (inoperative, check resistances). 5. Door switch (open contacts). 6. Door latch not making contact with door switch. 7. Touch pad circuit defective. 8. No indicator lamps illuminate when START or OPTIONS is depressed. Please do accept the solution if the issue is resolved or post a comment for further assistance. Thanks Rylee
Thank you for your reply, Rylee, however, I figured out the problem- Fuse is 15 for dishwasher and 20 at the hook up outlet! Switching plug over to a 15 fuse outlet solved the problem.Thank you for your reply, Rylee, however, I figured out the problem- Fuse is 15 for dishwasher and 20 at the hook up outlet! Switching plug over to a 15 fuse outlet solved the problem.
Answers & Comments
Hi
Thanks for using FixYa. You’ll need to check for the following--
1. Fuse (blown or tripped).
2. 120 VAC supply wiring connection faulty. Repair or replace wire fasteners at dishwasher junction box.
3. Electronic control board faulty.
4. Motor (inoperative, check resistances).
5. Door switch (open contacts).
6. Door latch not making contact with door switch.
7. Touch pad circuit defective.
8. No indicator lamps illuminate when START or OPTIONS is depressed.
Please do accept the solution if the issue is resolved or post a comment for further assistance.
Thanks
Rylee
Thank you for your reply, Rylee, however, I figured out the problem- Fuse is 15 for dishwasher and 20 at the hook up outlet! Switching plug over to a 15 fuse outlet solved the problem.
That's fine the issue has been resolved.
Thanks
Rylee