Press the input button on the front of tv till you get to video 1 also are you using the rca jacks on side of tv if so make sure the yellow wire is on top, white in middle, red on bottom. Yellow will give the picture. The other way to hook up is to use a coax cable from the satellitereceiver to the Tv antenna in, in the back of TV. And set the in put to TV.Press the input button on the front of tv till you get to video 1 also are you using the rca jacks on side of tv if so make sure the yellow wire is on top, white in middle, red on bottom. Yellow will give the picture. The other way to hook up is to use a coax cable from the satellitereceiver to the Tv antenna in, in the back of TV. And set the in put to TV.
No problem If you do not want to see the wires on the side of TV you can put them in the back bottom Left Video 2 this is the way to hook up from left to right, Yellow, white, red then select input 2 with the input button.No problem If you do not want to see the wires on the side of TV you can put them in the back bottom Left Video 2 this is the way to hook up from left to right, Yellow, white, red then select input 2 with the input button.
Answers & Comments
Did you changet the input to the input that you have the reciver conected to. Also do you have the manual.
Press the input button on the front of tv till you get to video 1 also are you using the rca jacks on side of tv if so make sure the yellow wire is on top, white in middle, red on bottom. Yellow will give the picture. The other way to hook up is to use a coax cable from the satellite receiver to the Tv antenna in, in the back of TV. And set the in put to TV.
No problem If you do not want to see the wires on the side of TV you can put them in the back bottom Left Video 2 this is the way to hook up from left to right, Yellow, white, red then select input 2 with the input button.