First determine if the wire drive motor responds to the trigger. If not, then there is a fuse for the motor I believe. If the motor tries to drive the wire, the wire MAY have jammed into the side of the transfer tube or the end fitting preventing it from moving.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
First determine if the wire drive motor responds to the trigger.
If not, then there is a fuse for the motor I believe.
If the motor tries to drive the wire, the wire MAY have jammed into the side of the transfer tube or the end fitting preventing it from moving.