WF000G Board Hi Tresil Thank you for replying to my earlier issue with the eeprom. I did lift the old one off and place it on the new baorad... worked perfectly. Now, in my haste to remove the card from the machine and after dropping off all connnectors I removed two single wires but did'nt note their exact location, a schoolboy error (traced them to the heater element). Have got the heater working but just want to check I have put these wires back onto their correct spade terminals. If you can help, great, if not thank you for trying. John
Washing Machines - Hotpoint - Aquarius WF000 Front Load Washer
johnnymcd could you please tell me where the wires go on the pcb the two wires wat you refer to in your post ive got them on the heater but dont know where they go on the pcb thanks dawnjohnnymcd could you please tell me where the wires go on the pcb the two wires wat you refer to in your post ive got them on the heater but dont know where they go on the pcb thanks dawn
Answers & Comments
I have the same prob i know where they go on the heater element but where do they go on the pcb
johnnymcd could you please tell me where the wires go on the pcb the two wires wat you refer to in your post ive got them on the heater but dont know where they go on the pcb thanks dawn
If the wires both go to thye heater element, it won't matter which way round they go
doug