Jumper Parking (PK) Position The PK position is used as a holding place for the jumper for a slave drive in systems that do not support Cable Select. The pins used for the parking position are vendor unique.
there is no RVSD jumper for this Hard Drive but if you need a break down for all the jumpers i can give you that.
Answers & Comments
Hello there,
Jumper Parking (PK) Position
The PK position is used as a holding place for the jumper for a slave drive in
systems that do not support Cable Select. The pins used for the parking position
are vendor unique.
there is no RVSD jumper for this Hard Drive but if you need a break down for all the jumpers i can give you that.
Thank you don't forget to Rate