1. Turn on the TV. 2. On the remote control, press and hold SET until the LED blinks twice, then release SET. NOTE: The remote control will exit programming if more than 10 seconds elapse between key presses. 3. Enter the first four-digit code for your TV. If you perform this procedure correctly, the LED will blink twice. NOTE: If the LED emits a long blink, the code is invalid. Repeat steps 2 through 3 and try entering the same code again. 4. Aim the remote control at your TV and press POWER once.The TV should turn off. If it does not respond, repeat steps 2-3, trying each code for your brand until you find one that works.
Answers & Comments
Hi! try these steps.. I hope it helps..
1. Turn on the TV.
2. On the remote control, press and hold SET
until the LED blinks twice, then release SET.
NOTE: The remote control will exit programming if
more than 10 seconds elapse between key presses.
3. Enter the first four-digit code for your TV. If
you perform this procedure correctly, the LED
will blink twice.
NOTE: If the LED emits a long blink, the code is
invalid. Repeat steps 2 through 3 and try entering the
same code again.
4. Aim the remote control at your TV and press
POWER once.The TV should turn off. If it does
not respond, repeat steps 2-3, trying each code
for your brand until you find one that works.
The code for samsung tv are:
Samsung 0060, 0030, 0178, 0019, 0056