What remote control code does the Onkyo TX-SR304 use?
I want to program ComCast's 3 in 1 universal remote to control my Onkyo TX-SR304 receiver in the "AUX" position. ComCast's instructions have me use codes 30135 or 30842. The 1st one will turn the unit on...the second code will turn the unit off, neither will control volume. There must be a code that's out there that will allow ComCast's universal remote to completely control a SR304.
Audio Players & Recorders - Onkyo - TX-SR304 Receiver
Answers & Comments
1) Tap AUX
2) Press & Hold Setup (1 then 2 blinks)
3) Enter 30842 or 0842 (The remote should blink twice)
4) Press & Hold Setup (1 then 2 blinks)
5) Enter 994 (2 blinks)
6) Tap Setup (1 blink)
7) Enter "00051" (1 blink per number)
8) Tap Power (not All On, just "power") (The remote should blink twice)
9) Tap AUX
10) Press & Hold Setup (1 then 2 blinks)
11) Enter 30135 or 0135
Thank you thank you THANK YOU. Wizard.
Does the Onkyo TX-SR500 Audio Receiver use the same process?
From: http://www.comcast.com/remotes/universal.html - only worked for me when I had AUX setup with 30135
- Press a desired mode key where you want volume to be unlocked (e.g., AUX) and controlled within its own mode.
- Press and hold SETUP until the selected mode key blinks twice, then release SETUP.
- Enter 9- 9- 3 and then press VOL- once. The mode key will blink four times confirming unlock.
Now, after you select a device that has volume unlocked (e.g., AUX), pressing VOL , VOL-, or MUTE will control the device's volume only in its own mode.
Unlocking Volume Control For A Single Device (Individual Volume Unlock):
If desired, repeat steps I to 3 (of this section) for each device that you want volume to be unlocked.