None. You take the white Y bracket and slide it up inside the steering wheel. Let the tips of the Y pop out of the second holes from the bottom. There will be about 3/4 of an inch of the bottom of the Y sticking out of the bottom of the steering wheel. Then, take the white ring and hold it over the edge of the steering wheel exit hole under the dash. Slide the steering wheel post through the hole in the top of the dash and guide it through the exit underneath. Now, there is another hole, at the same angle, a few inches away, on the inside front of the car, that the post should continue through. Keep pushing the steering wheel in until the wheel is flush with the dash. There will be several clicks as it snaps into place. No screws are needed. Good luck.
Answers & Comments
None. You take the white Y bracket and slide it up inside the steering wheel. Let the tips of the Y pop out of the second holes from the bottom. There will be about 3/4 of an inch of the bottom of the Y sticking out of the bottom of the steering wheel. Then, take the white ring and hold it over the edge of the steering wheel exit hole under the dash. Slide the steering wheel post through the hole in the top of the dash and guide it through the exit underneath. Now, there is another hole, at the same angle, a few inches away, on the inside front of the car, that the post should continue through. Keep pushing the steering wheel in until the wheel is flush with the dash. There will be several clicks as it snaps into place. No screws are needed. Good luck.