Is it directtly connected to you workstation or you are accessing via web on LAN or through WAN.Is it directtly connected to you workstation or you are accessing via web on LAN or through WAN.
You will need to check out in the control panel option in your pc.in control panel check the ADD/REMOVE hardware option.and in that check out if any lacie driver/software or file is loaded.if yes please click on the remove option then delete that hardware.then again reconnect the device to your pc and check out it will get detected and work properly. This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya
Answers & Comments
Hello :
Scan system for viruses and spywares please !
Check for manual here please ; http://safemanuals.com/user-guide-instructions-owner-manual/LACIE/BIG%20DISK%20USB%202.0-_E
good luck .
rate if useful please !
Could you please explain me how are you adding a User.
Is it directtly connected to you workstation or you are accessing via web on LAN or through WAN.
This can be done via iSCSI .
You will need to check out in the control panel option in your pc.in control panel check the ADD/REMOVE hardware option.and in that check out if any lacie driver/software or file is loaded.if yes please click on the remove option then delete that hardware.then again reconnect the device to your pc and check out it will get detected and work properly.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya