Use onboard graphics and enter the BIOS/CMOS by pressing the delete key during boot. Go through the options, some-where there, there should be an option to enable PCI-Express slot, PEG when one is inserted. This need to be set. So onboard VGA is disabled unless PCI-E Graphics card/PEG is inserted. damnor01
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Use onboard graphics and enter the BIOS/CMOS by pressing the delete key during boot.
Go through the options, some-where there, there should be an option to enable PCI-Express slot, PEG when one is inserted. This need to be set.
So onboard VGA is disabled unless PCI-E Graphics card/PEG is inserted.
damnor01