When I turn on the player, all the picture does is roll, whether it is on play or set up, not matter what I do with the remote all the picture does is roll. What can I do?
Televison & Video - Lite On - LVW-1107HC1 DVD Recorder
For a temporary connection use either a an RCA cable (Yellow/Red/White) or a coax line but leave your original connection in place as well. Connect the DVR to the TV using either the video output (RCA) or the coax output of the DVR to the TV and select that input on the TV. This should get you a clear picture back so that you can see the menu to make these changes. 1) Press the setup button on the remote. 2) Press the arrow key to get to SYSTEM and press ENTER 3) Select VIDEO OUTPUT and press enter 4) Select either COMPONENT OR PROGRESSIVE then press enter 5) When complete press the LEFT ARROW 6) To exit press SETUP then return to the original TV input and see if this fixed it.
If this solution causes the picture to go completely out then use the original solution I posted with the "5020".
If this still does not fix it here is the last one in my bag of tricks....
1) Press the SETUP button. 2) Select TV TUNER and press ENTER 3) Use the arrow keys to select your country and press enter 4) Use the arrow keys to select your region and press enter 5) When complete press the LEFT ARROW 6) To exit press SETUP 7) Return to the original input and see if this corrected your problem.
Good Luck...
Try this solution....
For a temporary connection use either a an RCA cable (Yellow/Red/White) or a coax line but leave your original connection in place as well. Connect the DVR to the TV using either the video output (RCA) or the coax output of the DVR to the TV and select that input on the TV. This should get you a clear picture back so that you can see the menu to make these changes. 1) Press the setup button on the remote. 2) Press the arrow key to get to SYSTEM and press ENTER 3) Select VIDEO OUTPUT and press enter 4) Select either COMPONENT OR PROGRESSIVE then press enter 5) When complete press the LEFT ARROW 6) To exit press SETUP then return to the original TV input and see if this fixed it.
If this solution causes the picture to go completely out then use the original solution I posted with the "5020".
If this still does not fix it here is the last one in my bag of tricks....
1) Press the SETUP button. 2) Select TV TUNER and press ENTER 3) Use the arrow keys to select your country and press enter 4) Use the arrow keys to select your region and press enter 5) When complete press the LEFT ARROW 6) To exit press SETUP 7) Return to the original input and see if this corrected your problem.
Answers & Comments
Try this...
On your remote press the right direction button then 5,0,2,0 then press enter wait about 10 seconds and then picture should return.
Good Luck...
Try this solution....
For a temporary connection use either a an RCA cable (Yellow/Red/White) or a coax line but leave your original connection in place as well.
Connect the DVR to the TV using either the video output (RCA) or the coax output of the DVR to the TV and select that input on the TV.
This should get you a clear picture back so that you can see the menu to make these changes.
1) Press the setup button on the remote.
2) Press the arrow key to get to SYSTEM and press ENTER
3) Select VIDEO OUTPUT and press enter
4) Select either COMPONENT OR PROGRESSIVE then press enter
5) When complete press the LEFT ARROW
6) To exit press SETUP then return to the original TV input and see if this fixed it.
If this solution causes the picture to go completely out then use the original solution I posted with the "5020".
If this still does not fix it here is the last one in my bag of tricks....
1) Press the SETUP button.
2) Select TV TUNER and press ENTER
3) Use the arrow keys to select your country and press enter
4) Use the arrow keys to select your region and press enter
5) When complete press the LEFT ARROW
6) To exit press SETUP
7) Return to the original input and see if this corrected your problem.
Good Luck...