When receiver is picked up, it opens the wrong line
Whenever we pick up the phone to dial out, the phone always uses the wrong line as its default.
We have two sets of phone lines, one rings only to our desk; while the other lines are for the entire office.
I would appreciate any help if there is a way to change what line the phone uses first.
We have two sets of phone lines, one rings only to our desk; while the other lines are for the entire office.
I would appreciate any help if there is a way to change what line the phone uses first.
Lands Phones - Lucent - PARTNER18 Corded Phone
Answers & Comments
. Changing line selection on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming
Press the right hand intercom once. The display should say Centralized Programming.
Enter in the extension number that you want to program.
enter **
press the lit line in the order you want the to be used, i.e. line 2 then line 3 then line 4 etc.
enter ** when finished with line selection
.
Press feature "00" to logout
Hope that helps