This generally happens when you match a larger weight on one side with a smaller weight on the other side of the ********, and usually can be fixed by just equaling out the weight and trying it again. Or remove the Dumbbells from the base and remove the plates from the base until the base was completely emptied. Then, with the emptied base, place the Dumbbells back within the base (without remaining plates on the floor). You should be able to switch the dials back to 10 lbs with plates from the Dumbbells coming off. Then simply place back all the plates within the base and place the DB back within the base with the plates ready to go. The Dumbbells should pick the plates right back up.
Thanks solved the problem I had with a bowlflex selecttech 1090 \'s dumbbell.Thanks solved the problem I had with a bowlflex selecttech 1090 \'s dumbbell.
Answers & Comments
This generally happens when you match a larger weight on one side with a smaller weight on the other side of the ********, and usually can be fixed by just equaling out the weight and trying it again. Or remove the Dumbbells from the base and remove the plates from the base until the base was completely emptied. Then, with the emptied base, place the Dumbbells back within the base (without remaining plates on the floor). You should be able to switch the dials back to 10 lbs with plates from the Dumbbells coming off. Then simply place back all the plates within the base and place the DB back within the base with the plates ready to go. The Dumbbells should pick the plates right back up.
Thanks solved the problem I had with a bowlflex selecttech 1090 \'s dumbbell.