When using component as the input, the profector is having a problem processing the picture. It is in purple and green bands with a wave moving across the screen. How do I fix this?
This projector should have 2 modes for component input, RGB and YPrPb. Make sure that you are in the correct mode. I suspect that the projector is expecting YPrPb and you are sending RGB.
Check that first and update this with what you find.
Answers & Comments
This projector should have 2 modes for component input, RGB and YPrPb. Make sure that you are in the correct mode. I suspect that the projector is expecting YPrPb and you are sending RGB.
Check that first and update this with what you find.
Dan