The crankshaft position sensor is located just above the starter and underneath the oil filter housing and is held in with one bolt. When you remove the bolt, pull straight out of the block with a twisting motion. Do not rock it back and forth, otherwise it will break off. If you have difficulty, spray carb cleaner or brake clean to dissolve the varnish.
Answers & Comments
Hope this help
The crankshaft position sensor is located just above the starter and underneath the oil filter housing and is held in with one bolt. When you remove the bolt, pull straight out of the block with a twisting motion. Do not rock it back and forth, otherwise it will break off. If you have difficulty, spray carb cleaner or brake clean to dissolve the varnish.