You gotta remove the filter and 2 top screws then pop the top anget the screws off that hold the front on. IMPORTANT: raise up on panel to release it from the clips or they will break! Set the panel out of your way and remove the drum.You will then be able to check the gas valve assembly. Old school training manual
I have a great page I put together HERE
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Answers & Comments
You gotta remove the filter and 2 top screws then pop the top anget the screws off that hold the front on. IMPORTANT: raise up on panel to release it from the clips or they will break! Set the panel out of your way and remove the drum.You will then be able to check the gas valve assembly.
Old school training manual
I have a great page I put together HERE
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Screwed to the bottom in front.