I am going to explain this real simple. The water pump is on the side with the serpentine belt. it is going to m=be one of the first pulleys you are going to see. Its the on under the alternator and it looks to have a rounded edge and for bolts holding the pulley on.
To replace you have to take the belt off, then take the pulley off (which could be difficult), then take out the 5 or 6 bolts from the block and tap it out or use a pry bar but dont bend or break anything. make sure you get a new gasket with your new water pump and always look up torque specs on bolts. (i always like using a torque wrench do to the fact that it is a aluminum block and you could over tighten and strip the threads and cause more work and or a leak.
Answers & Comments
I am going to explain this real simple. The water pump is on the side with the serpentine belt. it is going to m=be one of the first pulleys you are going to see. Its the on under the alternator and it looks to have a rounded edge and for bolts holding the pulley on.
To replace you have to take the belt off, then take the pulley off (which could be difficult), then take out the 5 or 6 bolts from the block and tap it out or use a pry bar but dont bend or break anything. make sure you get a new gasket with your new water pump and always look up torque specs on bolts. (i always like using a torque wrench do to the fact that it is a aluminum block and you could over tighten and strip the threads and cause more work and or a leak.
Good luckk!
Front left side of engine