Hello, You need to login and set it via the admin control panel. You need to know the IP address of the router first. Usually it is, http://192.168.0.1. If you are unsure, go to a computer that is connected to the same network and check out the default gateway. You can do this by going into the command prompt when using windows and by using the terminal on a mac. Unless the password for the admin panel is not set, you can use the default pass which is admin. Or you can try password or passw0rd. After logging in, you should be able to see the Wireless settings, and finally the security settings for it.
Answers & Comments
Hello,
You need to login and set it via the admin control panel. You need to know the IP address of the router first. Usually it is, http://192.168.0.1. If you are unsure, go to a computer that is connected to the same network and check out the default gateway. You can do this by going into the command prompt when using windows and by using the terminal on a mac.
Unless the password for the admin panel is not set, you can use the default pass which is admin. Or you can try password or passw0rd. After logging in, you should be able to see the Wireless settings, and finally the security settings for it.