Sorry for the troubles sounds like you have a bad timer since its not heat then the timer wont advance past a certain point. I would recommend you calling a qualified service technician come look at it and to replace the bad timer or you can do this yourself. You will need the model number off the dryer which will be on the back of the unit on the dash or inside the door opening take that number to your local appliance parts house so they can get you the proper timer. Now for installing it make sure you unplug the unit and then you will have to remove the back cover panel on the dash once removed slowly remove wire by wire replacing it to where its suppose to go on the new timer if you put a wire in the wrong spot you will fry the new timer once completed remove the old timer it should have 2 screws holding it to the dash and replace it with the new timer and put your cover back on and then plug it back up and set the timer to 60mins on the timed dry and tune it on and see if it Advances and heats. I hope this helps and thank you for using FixYa!
Answers & Comments
Sorry for the troubles sounds like you have a bad timer since its not heat then the timer wont advance past a certain point. I would recommend you calling a qualified service technician come look at it and to replace the bad timer or you can do this yourself. You will need the model number off the dryer which will be on the back of the unit on the dash or inside the door opening take that number to your local appliance parts house so they can get you the proper timer. Now for installing it make sure you unplug the unit and then you will have to remove the back cover panel on the dash once removed slowly remove wire by wire replacing it to where its suppose to go on the new timer if you put a wire in the wrong spot you will fry the new timer once completed remove the old timer it should have 2 screws holding it to the dash and replace it with the new timer and put your cover back on and then plug it back up and set the timer to 60mins on the timed dry and tune it on and see if it Advances and heats. I hope this helps and thank you for using FixYa!