Will not start up??
This product worked fine for about 2 months then all the sudden just quit on me. When I unplug the unit and plug it back in the indicator with the three squiggly lines blinks about 3 times then goes off. I tried resetting by holding down the power button, but when I press start the green light comes on and does nothing. I have tried cleaning the filters with all the brushes that came with it and still nothing. I plug it in, the red light blinks 3 times then I press start and nothing? Any help would be....well.....helpful, thanks. Have Bionaire BAP-1700U quit working after using 3 days. Was sent a new one same problem except only worked 1 hr. Unplugged 1 h., pushed power button and held 1 min. per company instruction. Still wouldn't work.
Air Purifiers - Bionaire - BAP1500-U Air Purifier
Answers & Comments
There is only one other thing that i can think of that might work ifyou haven't done that yet. right above the timer button there is a small pin hole. that is your reset button. you need like a safety pin or something really small to go in that hole. hold it for about 3 seconds. take the pin out and the system should reset back to normal. sometimes when you clean the filters that happens. not every time but sometimes. Now if that doesn't work. i would call the manufacturer again so see if they have any other solutions or if they can send you one more. I do apologize for the inconvenience. I will keep looking for you to see if there is anything else that i can suggest but try that first.