These small carburetors are notorious for plugging. First make sure your gas is clean, make sure the filter Is attached to the gas line in the tank. Remove the carb, disassemble and soak in in CLEAN gas for about 10 mins (submerge it) Be sure to agitates (stir or shake) Remove parts and blow out all ports with either canned air or small engine parts cleaner. Reassemble. This will need to be done every time the small filter falls off the tube in the gas tank if the gas you use is not pure.
Answers & Comments
These small carburetors are notorious for plugging.
First make sure your gas is clean, make sure the filter Is attached to the gas line in the tank.
Remove the carb, disassemble and soak in in CLEAN gas for about 10 mins (submerge it) Be sure to agitates (stir or shake)
Remove parts and blow out all ports with either canned air or small engine parts cleaner. Reassemble. This will need to be done every time the small filter falls off the tube in the gas tank if the gas you use is not pure.