See if you can hook an ethernet cable up between your computer and the Linksys. Then give it a few minutes and go to a command prompt and type ipconfig you will see the black screen display your ip address and so you can write down the gateway address. Now in a broswer, type the ip address. It will look something like this http://192.168.0.1 and you should see a configuration menu pop up. Hope this helps
Are you trying to set up router ? You can set up your router manually, without the CD. Make sure that your computer is able to go online directly through the modem. If your computer is able to go online through the modem, that means the modem is working fine. You will need to connect the computer to the router and the modem to the router. open the set up page of the router and change the settings of the router according to the ISP.
Click Here for more information about the routers and network
Answers & Comments
See if you can hook an ethernet cable up between your computer and the Linksys. Then give it a few minutes and go to a command prompt and type ipconfig you will see the black screen display your ip address and so you can write down the gateway address. Now in a broswer, type the ip address. It will look something like this http://192.168.0.1 and you should see a configuration menu pop up. Hope this helps
Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for more information about the routers and network