Won't flash I Have a Metz 70-mz5 flash that I am using with a canaon d10 digital cameral. I used it for a wedding and it fired ok for a while, then stopped and will not fire anymore. It charges, the lights come upt to 100 % on the battery. I also have the smaller batteries and it will not fire on either of those. Any Ideas?
Answers & Comments
Try to short out the contact pin of PC cable with a flat bladed screwdriver. This must set the flashtube off (flash), if not cable if defective.
[email protected]
Try to short out the PC cable's Center pin to outside contact. This should fire the flash.
If not, your cable is defective.
[email protected]
[email protected]