You need to check and replace the brushes in the motor if they are less than 3 or 4mm long. Access is usually from underneath the washer, this means laying it on its side.
This was helpful but my machine sounds as if the water is filing up then nothing clothes aren't wet and no cycle. I hope its just the brushes.This was helpful but my machine sounds as if the water is filing up then nothing clothes aren't wet and no cycle. I hope its just the brushes.
Hi. From what you say, I would say it is the brushes trhat need to be replaced.Hi. From what you say, I would say it is the brushes trhat need to be replaced.
Answers & Comments
You need to check and replace the brushes in the motor if they are less than 3 or 4mm long.
Access is usually from underneath the washer, this means laying it on its side.
This was helpful but my machine sounds as if the water is filing up then nothing clothes aren't wet and no cycle. I hope its just the brushes.
Hi.
From what you say, I would say it is the brushes trhat need to be replaced.