WordPerfect prints a blank label after each request
I have WP10 and a template has been created for the networked label printer, LP2844 and after each print request a blank label is also printed.
Does this have anything to do with the default printer having duplexing selected? as WP uses the system settings and is some how messing up the Zebra to make it think there is 2 labels, when in reality there is only 1 requested?
The default printer is a Lexmark.
Does this have anything to do with the default printer having duplexing selected? as WP uses the system settings and is some how messing up the Zebra to make it think there is 2 labels, when in reality there is only 1 requested?
The default printer is a Lexmark.
Office Equipment & Supplies - Zebra - LP 2844 Thermal Printer
Answers & Comments
Check you printer setup in the menu field. If it is computer activated ti will guide you.
I would think you are printing using a printer driver for the LP2844, not using the lexmark driver. Depending on whose Zebra driver you're using, one setting to check would be to make sure the web sensor is being used for type of media sensor. The names for this setting vary but can usually be found in the printing preferences tab.
Hope this helps a little.....