Xantrex power inverter 1750
Inverter wired (1/0 cables ) to batteriy shows 13.5 V on inverter indicator, I plug in lamp with 25w bulb into AC receptical,light turns on , fault red indicator light comes on and ac power(light) shuts off...fuses ok...no burning smell..no visual damage......
Car Audio & Video - Xantrex Technology - Xantrex Xpower 1750 Plus High Power Inverter
Answers & Comments
Sir ,
one of the ic or resistor will be damaged inside ,so kindly replace it,it will be alright.
The 14 AWG Positive wire should be connected to one side of a 30 A relay (typical fog lamp relay available at most automotive stores). The relay's other 30 A contact should be connected to the battery positive post via a 10 AWG (up to 6 ft/2 m)
Check also the following link
Xantrex Technology Inc. - FAQ
And the user guide here
XPower Inverter 1200 PLUS 1750 PLUS
Ensure you are using the right bulb.