XO Vision GX-1581 No Signal
I have a no signal box in middle of screen, it was a replacement and it went back because of the same thing, when it first powers on it shows AV2, the remote was not left when unit was installed and I have moved 1200 miles from the store I bought it from, where would I get a remote or how do I get the menu to show up, the menu button is in the middle of up and down buttons so I pressed both without any responce.
would this be a wiring issue or a worng setting on the monitor?
Car Audio & Video - XO Vision - GX828 8" Roof Mount TFT LCD Monitor with Full Function...
Answers & Comments
Press the menu button (the second button down) repeatedly until you get to the input screen. Then press either the (+) or (-) buttons to toggle between AV1 and AV2
It looks like you've narrowed it down to a settings issue. If it is saying "No Signal" while on AV2, then you need to switch to AV1 where your video signal is. A remote might be available online from XO Vision (www.xovision.com) directly or on E-bay. You might also be able to find a local dealer of XO Vision from their website. One quick fix you can try....since the monitor has 2 video inputs and is stuck on AV2, you can simply get video by unplugging the video input on AV1 and plugging it into AV2. Hope this was helpful.