Hi Andrew Smith, as you comment, the problem would be in the remote control You can do a test to see if the remote control is broadcasting You put the camera of your cell phone focusing on the emitter of the remote control, press any key on the remote and through the camera you will see that the emitting LED turns on (this happens through the cameras of the cell phones detect infrared rays, our view can not do it directly) With this method you can check if they are emitting each key of the remote control If you don't emit, you can try cleaning the internal contacts Try to carefully disassemble the remote control Separate the plate and the rubber template from the keys, clean the latter with some neutral soap, removing the grease that forms in the contact area, on the other hand, clean the plate with a cloth dampened with a glass cleaner, NO USE ALCOHOL in any case, let all parts dry and reassemble Take the test and comment Greetings Franco Dosil
Hola Andrew Smith, por lo que comentas, el problema estaria en el control remoto Puedes hacer una prueba para ver si el control remoto esta emitiendo Colocas la camara de tu celular enfocando al emisor del control remoto, presionas cualquier tecla del remoto y a traves de la camara veras que el LED emisor se enciende (esto sucedepor las camaras de los celulares detectan los rayos infrarojos, nuestra vista directamente no puede hacerlo) Con este metodo podras comprobar si estan emitiendo cada tecla del control remoto Siencuentras que no emiten, puedes probar limpiar los contactos internos Trata de desarmar con mucho cuidado el control remoto Separa la placa y la plantilla de goma de las teclas, limpia esta ultima con algun jabon neutro, sacandole la grasitud que se forma en la zona de contactos, por otro lado, limpia la placa con un pa?o humedecido con algun limpiador para vidrios, NO USES ALCOHOL en ningun caso, deja secar bien todas las partes y vuelve a armarlo Haz la prueba y comenta Saludos Franco Dosil
(2) be sure that you clean the plastic display cover with a soft dry towel.
(3) When or if you take the cover off the remote control be sure not to use soaps or Windex and or water. There is a thing called board cleaner. Follow all the directions on the spray can. Also spray paint rubber part and or called the key pad. It will separate from the board and the plastic housing with ease. Not to worry. Off all this fails turn the TV around so that you can clearly see the back of the TV. You will see one or more sticker's. Look for the large size one and then copy the name of the TV make an model year. This will help you locate a replacement remote. They don't cost all that much now a days. I do hope that you can get it going again soon. I hope that this helps you in some way.
Answers & Comments
Hi Andrew Smith, as you comment, the problem would be in the remote control
You can do a test to see if the remote control is broadcasting
You put the camera of your cell phone focusing on the emitter of the remote control, press any key on the remote and through the camera you will see that the emitting LED turns on (this happens through the cameras of the cell phones detect infrared rays, our view can not do it directly)
With this method you can check if they are emitting each key of the remote control
If you don't emit, you can try cleaning the internal contacts
Try to carefully disassemble the remote control
Separate the plate and the rubber template from the keys, clean the latter with some neutral soap, removing the grease that forms in the contact area, on the other hand, clean the plate with a cloth dampened with a glass cleaner, NO USE ALCOHOL in any case, let all parts dry and reassemble
Take the test and comment
Greetings Franco Dosil
Hola Andrew Smith, por lo que comentas, el problema estaria en el control remoto
Puedes hacer una prueba para ver si el control remoto esta emitiendo
Colocas la camara de tu celular enfocando al emisor del control remoto, presionas cualquier tecla del remoto y a traves de la camara veras que el LED emisor se enciende (esto sucedepor las camaras de los celulares detectan los rayos infrarojos, nuestra vista directamente no puede hacerlo)
Con este metodo podras comprobar si estan emitiendo cada tecla del control remoto
Siencuentras que no emiten, puedes probar limpiar los contactos internos
Trata de desarmar con mucho cuidado el control remoto
Separa la placa y la plantilla de goma de las teclas, limpia esta ultima con algun jabon neutro, sacandole la grasitud que se forma en la zona de contactos, por otro lado, limpia la placa con un pa?o humedecido con algun limpiador para vidrios, NO USES ALCOHOL en ningun caso, deja secar bien todas las partes y vuelve a armarlo
Haz la prueba y comenta
Saludos Franco Dosil
https://europe.yamaha.com/en/products/audio_visual/av_receivers_amps/rx-v367/downloads.html
(1) Try replacing the batteries.
(2) be sure that you clean the plastic display cover with a soft dry towel.
(3) When or if you take the cover off the remote control be sure not to use soaps or Windex and or water.
There is a thing called board cleaner. Follow all the directions on the spray can. Also spray paint rubber part and or called the key pad. It will separate from the board and the plastic housing with ease. Not to worry. Off all this fails turn the TV around so that you can clearly see the back of the TV.
You will see one or more sticker's. Look for the large size one and then copy the name of the TV make an model year. This will help you locate a replacement remote. They don't cost all that much now a days. I do hope that you can get it going again soon. I hope that this helps you in some way.