Zenith E44W48LCD Projection TV stopped working
I was playing on my PS3 and all of a sudden there's no picture. The light that's supposed to be green when the TV is on blinks yellow for about a minute then turns red. Also there is an intermittent buzzing.
Here's a link to the TV
http://www.hdtvsolutions.com/Zenith-E44W48LCD.htm
Does this sound familiar to anyone?
Televison & Video - Zenith - E44W46LCD 44" Rear Projection HDTV-Ready Television
Answers & Comments
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, [Exclude the model number] in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.