Check to see if you have 12 volts going into the coil. make sure the coil has a good ground. If it does not work you could do an ohm check on the spark plug wire to see if it is broken or not. On the spark plug pull back the rubber boot at the wire and un screw the cap. check and make sure cap has good contact into wire. you could trim the wire back a very little bit and screw the cap back on a check again. let me know
Answers & Comments
Check to see if you have 12 volts going into the coil. make sure the coil has a good ground. If it does not work you could do an ohm check on the spark plug wire to see if it is broken or not. On the spark plug pull back the rubber boot at the wire and un screw the cap. check and make sure cap has good contact into wire. you could trim the wire back a very little bit and screw the cap back on a check again. let me know