I just bought the zx700.5 amp and got everything all wired and wired correctly. I had driven around with only the rear speakers for a day and that worked fine at high volumes, the next day I worked on the front right speaker and got that wired in, that also worked just fine at high volumes. I then proceeded to wire in the front left speaker, once I wired that and mounted it the amp started to go into protection mode if turn up about about 60% volume. I tried unhooking the front left speaker to see if it was a pinched wire somewhere between that speaker and the amp, but now it cuts out with it unhooked. Can anyone help with my problem?

Car Audio & Video - Kicker - 06ZX750.1 Car Audio Amplifier