AVR 3808Ci Receiver - Help Manuals User Guides

AVR 3808Ci Receiver Owners Manuals, User Guides, Instructional Help Documents & Information.

Featured Questions

Preliminary list of posts to be most interested community
Digital projector is shutting down as soon as dvd
Answer
configuration issue: I have a Denon
Answer
How do I hook up an Iphone 5s to play music?
Answer
NO GUI displayed
Answer
3808ci firmware reset
Answer
speaker problem
Answer
Denon Surround Receiver Mod.: AVR 3808CI Issue: My Denon Surround Receiver Mod.: AVR 3808CI is connected to a Charter Cable box (Mod.: Scientific Atlanta 4250HDC), an LG HD DVD (Mod.: BH100), and a 52? Samsung TV (Mod.: HL-P5063). This system configuration is about 10 to 12 months old. I?m having two problems I believe are related to the Denon Receiver. 1 ? The video drops out for 5 to 8 seconds while a program. This occurred for 3 to 4 months from Dec.2008 thru April 2009 then began to behave OK. 2 ? Recently for a month or so, when changing the channel from, say, Ch 47 to Ch50, the audio would drop out at Ch 50 and would continue for several higher channels, sometimes as high as I would go. If I stopped at Ch 50 and cycled back to Ch 49, 48, and 47, the audio would resume. I tried several possible investigative solutions. I used the respective RC?s for each item. a. Relative to problem 1 - When the video was dropping out, I used the TV RC, during the 5 second video drop-out period to change volume and observed the normal volume control indication on the screen. I also observed, when there was no video, the lamp would glow inside the back cover thinking the screen was completing shutting down. The lamp continued to glow. This problem has not reoccurred. b. Relative to problem 2 - When changing the input between HDMI using the RC from HDMI position 3 (TV) to position 1 (DVD) then back to position 3, while sitting on Ch 50, the volume would resume. But when cycling back to Ch 47, the volume would again drop out. Then again moving back thru Ch?s 48 thru 50, the volume would resume. c. Relative to problem 2 - When the TV is operating, while viewing Ch 47 and the sound cuts, if I power off the Denon Rec., wait 3 to 5 seconds, then power the Denon Receiver back on (it is automatically set to come on at Ch 47, the volume resumes. When then advancing up to Ch 50, volume is on thru Ch 49 but cuts out at Ch 50. d. Relative to problem 2 - I also tried using the DVD, set to HDMI position 1 via the RC, the volume sometimes works and sometimes not
Answer
Denon avr 3805 2 zone configuration, I added optical sound from TIVO and now zone 2 is not working. I did the test of the speakers and they all work. I have configured the main for 5 channel stereo
Answer
Hit some buttons, now i can get 7 channel output
Answer
volume control bar on the TV?
Answer
Dish HD-DVR connected to a Denon 3808ci via an HDMI cable. Problem is periodically, the screen goes black for a split second and then comes back. Rewind and play again the blackout doesn't repeat. When this happens, the window on the Denon changes replacing Dolby Digital with I don't know what until, after a split second, the screen and the Denon return to normal. I am on my second HD-DVR from Dish. They have sent me a third to try. I'm beginning to think the problem is: passing everything through the Denon. I rebooted the Denon and even went so far as to reformat the microprocessor to no avail. Any suggestions? Have you heard of this problem from anyone else. Frank Marquardt [email protected]
Answer
I have a Denon AVR-3808CI. All works well, except recently when a family member was using the remote (RC-1068) to switch from TV to the AMP, a sequence of buttons was pushed that has disabled the GUI menu capability on the TV screen. Also the volume control does not appear on the TV screen. The Receiver does indeed to into menu mode, but will only display on the receiver display screen. The GUI menu will not display on the TV Monitor. TV and all other functions are working properly,
Answer

Latest Questions

Latest posts in community
Hit some buttons, now i can get 7 channel output
Answer
I have a Denon AVR-3808CI. All works well, except recently when a family member was using the remote (RC-1068) to switch from TV to the AMP, a sequence of buttons was pushed that has disabled the GUI menu capability on the TV screen. Also the volume control does not appear on the TV screen. The Receiver does indeed to into menu mode, but will only display on the receiver display screen. The GUI menu will not display on the TV Monitor. TV and all other functions are working properly,
Answer
Digital projector is shutting down as soon as dvd
Answer
3808ci firmware reset
Answer
Dish HD-DVR connected to a Denon 3808ci via an HDMI cable. Problem is periodically, the screen goes black for a split second and then comes back. Rewind and play again the blackout doesn't repeat. When this happens, the window on the Denon changes replacing Dolby Digital with I don't know what until, after a split second, the screen and the Denon return to normal. I am on my second HD-DVR from Dish. They have sent me a third to try. I'm beginning to think the problem is: passing everything through the Denon. I rebooted the Denon and even went so far as to reformat the microprocessor to no avail. Any suggestions? Have you heard of this problem from anyone else. Frank Marquardt [email protected]
Answer
speaker problem
Answer
Denon avr 3805 2 zone configuration, I added optical sound from TIVO and now zone 2 is not working. I did the test of the speakers and they all work. I have configured the main for 5 channel stereo
Answer
configuration issue: I have a Denon
Answer
Denon Surround Receiver Mod.: AVR 3808CI Issue: My Denon Surround Receiver Mod.: AVR 3808CI is connected to a Charter Cable box (Mod.: Scientific Atlanta 4250HDC), an LG HD DVD (Mod.: BH100), and a 52? Samsung TV (Mod.: HL-P5063). This system configuration is about 10 to 12 months old. I?m having two problems I believe are related to the Denon Receiver. 1 ? The video drops out for 5 to 8 seconds while a program. This occurred for 3 to 4 months from Dec.2008 thru April 2009 then began to behave OK. 2 ? Recently for a month or so, when changing the channel from, say, Ch 47 to Ch50, the audio would drop out at Ch 50 and would continue for several higher channels, sometimes as high as I would go. If I stopped at Ch 50 and cycled back to Ch 49, 48, and 47, the audio would resume. I tried several possible investigative solutions. I used the respective RC?s for each item. a. Relative to problem 1 - When the video was dropping out, I used the TV RC, during the 5 second video drop-out period to change volume and observed the normal volume control indication on the screen. I also observed, when there was no video, the lamp would glow inside the back cover thinking the screen was completing shutting down. The lamp continued to glow. This problem has not reoccurred. b. Relative to problem 2 - When changing the input between HDMI using the RC from HDMI position 3 (TV) to position 1 (DVD) then back to position 3, while sitting on Ch 50, the volume would resume. But when cycling back to Ch 47, the volume would again drop out. Then again moving back thru Ch?s 48 thru 50, the volume would resume. c. Relative to problem 2 - When the TV is operating, while viewing Ch 47 and the sound cuts, if I power off the Denon Rec., wait 3 to 5 seconds, then power the Denon Receiver back on (it is automatically set to come on at Ch 47, the volume resumes. When then advancing up to Ch 50, volume is on thru Ch 49 but cuts out at Ch 50. d. Relative to problem 2 - I also tried using the DVD, set to HDMI position 1 via the RC, the volume sometimes works and sometimes not
Answer
NO GUI displayed
Answer
volume control bar on the TV?
Answer
How do I hook up an Iphone 5s to play music?
Answer

Helpful Links

Helpful Social

Copyright © 2024 QA.XPDF.PUB - All rights reserved.